£215.00 (inc. VAT)
Designed specifically for stereo field recording, interviews and home recording, the compact and lightweight AT2022 is suitable as a handheld microphone as well as when mounted on a boom or camera. Ideal for recording reports, the AT2022 unidirectional condenser capsules provide you professional quality stereo, without the need for 48V phantom power. Its 1.5V AA battery enables you to connect to virtually any audio recorders. The capsules can be rotated 90 or 120 degrees, to control the stereo width of your recording, and fold completely for easy storage and transportation.
No more time wasted setting up of a pair of condenser mics, 2 feet and a recorder with phantom power to make a professional stereo sound recording. The AT2022 simply connects to any recorder and achieves a perfect X/Y stereo sound recording.
Ideal for general stereo recording and field sound capture, the AT2022 reproduces the spatial impact and realism of a live sound field.
With its gentle filter slope of 6 dB / Octave at 150 Hz, low frequencies are monitored very soft and natural way. An integral 150 Hz low-cut filter provides easy switching from a flat frequency response to a low-end roll-off. The roll-off position reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically coupled vibrations.
Two unidirectional capsules positioned in an X / Y configuration provide user-selectable 90° to 120° stereo operation for narrow or wide pickup patterns.
Switchable Off / Flat / Low-cut positions for better isolation of unwanted noise.
The capsules can be placed at 180° during storage to prevent damage to the unidirectional elements.
Comes with an AT8405a stand clamp for 5/8"-27 threaded stands, a 1.5V AA battery, a fuzzy windscreen, a 0.5 m long jack to XLR (TRS) cable, and a soft protective pouch.
|Element||Fixed-charge back plate, permanently polarized condenser|
|Polar Pattern||X/Y Stereo|
|Frequency Response||20 - 20,000 Hz|
|Open Circuit Sensitivity||-41 dB (8.9 mV) re 1V at 1 Pa|
|Maximum Input Sound Level||122 dB SPL, 1 kHz at 1% T.H.D.|
|Channel Balance||<2.5 dB|
|Low Frequency Roll Off||150 Hz, 6 dB/octave|
|Switches||Off, on/flat, on/roll-off|
|Dynamic Range||103 dB, 1 kHz at Max SPL|
|Signal-to-Noise Ratio||75 dB, 1 kHz at 1 Pa|
|Battery Type||1.5V AA/UM3|
|Battery Current/Life||1.2 mA / 500 hours typical (alkaline)|
|Dimensions||192.0 mm (7.56") long,
65.0 mm (2.56") maximum head diameter,
21.0 mm (0.83") body diameter
|Output Connector||Integral 3-pin XLRM-type|
|Cable||0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end|
|Accessories Included||AT8405a stand clamp for 5/8"-27 threaded stands; fuzzy windscreen; battery; soft protective pouch|
The Audio-Technica Service Centre offer you spare parts and repairs for Microphones, Wireless Systems, Headphones and all other Audio-Technica branded products.
Help us to put you in touch with the right support team for your country. Select your region and country below:
All Audio-Technica 40 series, 50 series, Artist and Artist Elite products come with a lifetime warranty as standard meaning you can enjoy your product safe in the knowledge that it’s guaranteed for life from the date of purchase to be free of defects in materials and workmanship. In the event of such defect, the product will be repaired or replaced without charge.*
(* Deemed by Audio-Technica to be 15 years (Serviceable lifetime), T&Cs apply)