AT8035

Line + Gradient Condenser Microphone, 369mm

  • Designed for video production and broadcast (ENG/EFP) audio acquisition
  • Provides the narrow acceptance angle desirable for long-distance sound pick
  • Excellent sound rejection from the sides and rear of mic
  • Switchable low-frequency roll-off
  • Operates on battery or phantom power
  • Deliver with stand clamp, windscreen, battery and protective carrying case

£ (Contact your local reseller for pricing)

AT8035 AT8035 AT8035 AT8035

Product Features

  • 369mm Shotgun Microphone
  • Captures sound with high intelligibility in noisy environments
  • Two power modes (battery or phantom power) for versatility
  • 80Hz low-frequency roll-off, with a slope of 18dB / octave to reduce pickup of low-frequency ambient noise
  • Effective protection against interference from nearby mobile phones and other unwanted radio frequencies
  • Equipped with a windscreen

AT8035

very precise sound recording, even in noisy environments

The AT8035 is ideal for videos and movies but should be installed outside of the image, in other words, out of camera range. This type of microphone, provided with an interference tube in front of the capsule, which cancels a large part of its off-axis.

Audio-Technica's Line and Gradient Condenser Microphones combine a directional capsule ("gradient") and an interference tube which removes the sound from the rear. Generally, the interference tube of this type of microphone can be extended to reduce the acceptance angle and thus increase the sound capture distance. Short condenser microphones do not have as long a range as shotgun models, but in some cases are preferred for their greater acceptance angle, when the accuracy of the source is less important.

  • 369mm Shotgun Microphone, designed for video production and broadcast (ENG/EFP) audio acquisition
  • Provides the narrow acceptance angle desirable for long-distance sound pickup
  • Captures sound with high intelligibility in noisy environments with its excellent sound rejection from the sides and rear of mic
  • Two power modes (battery or phantom power) for versatility
  • 80Hz low-frequency roll-off, with a slope of 18dB / octave to reduce pickup of low-frequency ambient noise
  • Effective protection against interference from nearby mobile phones and other unwanted radio frequencies
  • Equipped with a foam windscreen, the AT8035 comes with a 1.5V AA battery, a stand clamp and a carry case
 

“Low-cut filter”

The low-cut position reduces sensitivity to ambient low frequency noise such as traffic noise, ventilation, reverberation of the room or mechanical vibrations transmitted through the recording device.

“two powering options”

The AT8035 shotgun microphone can be powered in two ways allowing for maximum versatility. You can use it on a professional camera or recorder equipped with XLR inputs with phantom power, or by using a 1.5V AA battery (included) on any device equipped with XLR inputs.

“high intelligibility”

Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off. The AT8035 guarantees you a very specific audio capture with high intelligibility.

 

battery / phantom power

Two power modes (battery or 48V phantom power) for increased versatility.

low-cut FILTeR

Switchable low-cut filter for better isolation of unwanted noise.

line + gradient

The AT8035 combines a directional capsule ("gradient") and an interference tube which removes the sound from the rear.

accessories

Comes with a stand clamp, a foam windscreen, a 1.5V AA battery, two O-rings and a carrying case.

AT8035
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Line + gradient
Frequency Response 40-20,000 Hz
Open Circuit Sensitivity Phantom: -38 dB (12.5 mV) re 1V at 1 Pa Battery: -39 dB (11.2 mV) re 1V at 1 Pa
Impedance Phantom: 250 ohms Battery: 300 ohms
Maximum Input Sound Level Phantom: 132 dB SPL, 1 kHz at 1% T.H.D. Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off 80 Hz, 18 dB/octave
Switches Flat, roll-off
Dynamic Range Phantom: 110 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 72 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical
Battery Type 1.5V AA/UM3
Battery Current/Life 0.4 mA / 1200 hours typical (alkaline)
Weight 170 g (6,0 oz)
Dimensions 369.0 mm (14.53") long, 21.0 mm (0.83") diameter
Output Connector Integral 3-pin XLRM-type
Accessories Included AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8132 windscreen; battery; protective carrying case

AT8035

Related Products

AT8132

Shotgun Foam Windscreen

£24.00

AT8405A

Snap-in Microphone Stand Clamp

£13.00

AT8410A

Microphone Shock Mount

£67.00

AT8415

Microphone Shock Mount

£82.00

AT8430

Studio Microphone Isolation Mount

£161.00

AT8471

Microphone Isolation Stand Clamp

£30.00

BPF-250

250 mm Fur Sock

£38.00

BPW-250

250 mm Windshield with Fur

£77.00

BPZ-M

310 mm Soft-Zep Windcover and Pistol Grip

£197.00

AT8035

Line + Gradient Condenser Microphone, 369mm

Name Filetype Filesize
AT8035 Specification Sheet PDF 124 KB
AT8035 Polar Pattern JPG 51 KB
AT8035 Frequency Response JPG 44 KB
AT8035 Declaration of Conformity PDF 77 KB

Service & Warranty

The Audio-Technica Service Centre offer you spare parts and repairs for Microphones, Wireless Systems, Headphones and all other Audio-Technica branded products.

Contact Support

Help us to put you in touch with the right support team for your country. Select your region and country below:



Trusted by industry professionals

Trusted by industry professionals

Whether it’s on the boardroom table, the stage or in the studio, Audio-Technica products are trusted time and again by industry professionals looking for reliable, lovingly developed audio products for all budgets.

It’s Audio-Technica’s commitment to innovation, customer service and meticulous design that ensure professionals turn to us to provide solutions in conferencing, houses of worship, broadcasting, live sound, recording studios and beyond.

 

50 Years of Devotion to music

50 Years of Devotion to music

For over 50 years Audio-Technica has worked alongside leading figures in sports and music broadcast to develop and hone a range of products that deliver on the highest level.

Audio-Technica have developed and delivered products to power the Grammys, World Cup, Super Bowl, Commonwealth Games as well as every Summer and Winter Games from Atlanta 1996 to Sochi 2014.

 

A Legacy in Innovation

A Legacy in Innovation

Founded in 1962 by Hideo Matsushita, Audio-Technica positioned itself immediately as a leader in the manufacture and design of innovative audio products.

It’s expertise in innovation quickly spread to various new fields and led to the development of tone arms, microphones and headphones. Audio-Technica soon became a benchmark in those fields. Making history.

A self-made man and audiophile, Hidéo Matsushita was the former Director of the Tokyo Museum of Modern Art. It all started in his workshop, with the hand crafting of stereo cartridges. 50 years later, Audio-Technica has become a global leader in audio innovation.

 

A Passion for Listening

A Passion for Listening

Humility, passion, creativity and expertise in sound are the core values behind Audio-Technica’s legacy, greatly inspired by its founder - whose imprint on the company’s philosophy is still felt today.

Audio-Technica’s passion for listening evolved in the 70’s, when it started designing headphones, building upon a legacy in innovation, meticulous engineering and artistic design.

Today, Audio-Technica’s audio products have become globally synonymous with consistently high sonic performance paired with impeccable build construction and artistic design.

 

Two Year Limited Warranty

Two Year Limited Warranty

All Audio-Technica products come with a two year warranty as standard meaning you can enjoy your product safe in the knowledge that you’re covered.

All Audio-Technica products purchased from Audio-Technica Europe are guaranteed for two years from the date of purchase to be free of defects in materials and workmanship. In the event of such defect, the product will be repaired or replaced without charge*.

(* T&Cs apply)