PRO37

Small-Diaphragm Cardioid Condenser Microphone

  • Professional performance for studio recording and live sound reinforcement
  • Low-mass element for superb transient response
  • Excels in high-SPL applications
  • Low-profile design for optimal mic placement
  • Corrosion-resistant contacts from gold-plated XLRM-type connector
  • Rugged design and construction for reliable performance

£208.00 (inc. VAT)

PRO37 PRO37 PRO37 PRO37 PRO37
PRO37

PRO37

Small-Diaphragm Cardioid Condenser Microphone

The PRO37 has established itself as a versatile solution for studio recording and live performance. With a low-mass element for superb transient response and a low-profile design for optimal mic placement, this mic excels in high-SPL applications. It is ideal for acoustic guitar, overheads, piano and group vocals. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

  • Professional performance for studio recording and live sound reinforcement
  • Low-mass element for superb transient response
  • Excels in high-SPL applications
  • Low-profile design for optimal mic placement
  • Corrosion-resistant contacts from gold-plated XLRM-type connector
  • Rugged design and construction for reliable performance
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
PRO37
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 30 - 15,000 Hz
Open Circuit Sensitivity -42 dB (7.9 mV) re 1V at 1 Pa
Impedance 200 ohms
Maximum Input Sound Level 141 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 112 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical
Weight 49g
Dimensions 3.9" (99.0 mm) long, 0.83" (21.0 mm) maximum body diameter
Output Connector Integral 3-pin XLRM-type
Accessories Included AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8159 windscreen; soft protective pouch

PRO37

Related Products

AT8106

Metal slip-on pop filter

£52.00

AT8159

Small Egg-Shaped Foam Windscreen

£9.00

AT8405A

Snap-in Microphone Stand Clamp

£13.00

AT8410A

Microphone Shock Mount

£67.00

AT8415

Microphone Shock Mount

£82.00

AT8471

Microphone Isolation Stand Clamp

£30.00

PRO37

Small-Diaphragm Cardioid Condenser Microphone

Name Filetype Filesize
PRO37 Specification Sheet PDF 69 KB
PRO37 Polar Pattern JPG 51 KB
PRO37 Frequency Response JPG 45 KB
PRO37 Declaration of Conformity PDF 55 KB

Service & Warranty

The Audio-Technica Service Centre offer you spare parts and repairs for Microphones, Wireless Systems, Headphones and all other Audio-Technica branded products.

Contact Support

Help us to put you in touch with the right support team for your country. Select your region and country below:



Trusted by industry professionals

Trusted by industry professionals

Whether it’s on the boardroom table, the stage or in the studio, Audio-Technica products are trusted time and again by industry professionals looking for reliable, lovingly developed audio products for all budgets.

It’s Audio-Technica’s commitment to innovation, customer service and meticulous design that ensure professionals turn to us to provide solutions in conferencing, houses of worship, broadcasting, live sound, recording studios and beyond.

 

50 Years of Devotion to music

50 Years of Devotion to music

For over 50 years Audio-Technica has worked alongside leading figures in sports and music broadcast to develop and hone a range of products that deliver on the highest level.

Audio-Technica have developed and delivered products to power the Grammys, World Cup, Super Bowl, Commonwealth Games as well as every Summer and Winter Games from Atlanta 1996 to Sochi 2014.

 

A Legacy in Innovation

A Legacy in Innovation

Founded in 1962 by Hideo Matsushita, Audio-Technica positioned itself immediately as a leader in the manufacture and design of innovative audio products.

It’s expertise in innovation quickly spread to various new fields and led to the development of tone arms, microphones and headphones. Audio-Technica soon became a benchmark in those fields. Making history.

A self-made man and audiophile, Hidéo Matsushita was the former Director of the Tokyo Museum of Modern Art. It all started in his workshop, with the hand crafting of stereo cartridges. 50 years later, Audio-Technica has become a global leader in audio innovation.

 

A Passion for Listening

A Passion for Listening

Humility, passion, creativity and expertise in sound are the core values behind Audio-Technica’s legacy, greatly inspired by its founder - whose imprint on the company’s philosophy is still felt today.

Audio-Technica’s passion for listening evolved in the 70’s, when it started designing headphones, building upon a legacy in innovation, meticulous engineering and artistic design.

Today, Audio-Technica’s audio products have become globally synonymous with consistently high sonic performance paired with impeccable build construction and artistic design.

 

Two Year Limited Warranty

Two Year Limited Warranty

All Audio-Technica products come with a two year warranty as standard meaning you can enjoy your product safe in the knowledge that you’re covered.

All Audio-Technica products purchased from Audio-Technica Europe are guaranteed for two years from the date of purchase to be free of defects in materials and workmanship. In the event of such defect, the product will be repaired or replaced without charge*.

(* T&Cs apply)