ATM710

Cardioid Condenser Handheld Microphone

  • Excels in venues with controlled stage volume or in-ear monitoring
  • Superior anti-shock engineering for low handling noise
  • Condenser design for studio-quality performance
  • Integral 80 Hz HPF switch and 10 dB pad switch
  • Rugged, all-metal design and construction
  • Quiet-FlexTM stand clamp provides silent, exible microphone positioning

£173.00 (inc. VAT)

ATM710 ATM710 ATM710 ATM710

Product Features

ATM710
  • Customised vocal reproduction, high fidelity and extreme clarity maximizing impact and intelligibility
  • Condenser design for studio-quality performance
  • Excels in venues with controlled stage volume or in-ear monitoring
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Superior anti-shock engineering for low handling noise
  • Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
  • Integral 80 Hz HPF switch and 10 dB pad switch
  • Rugged, all-metal design and construction for years of trouble-free use

Featured Video

ATM710

ATM710

high fidelity Cardioid Condenser Handheld Microphone

This electret singing microphone from the Artist Series range is designed for detailed and faithful voice reproduction. With a capacitor designed for studio-quality performance, the ATM710 provides remarkable clarity. This microphone is equipped with an integral 80Hz low-cut filter that allows easy switching from a flat frequency response to severe attenuation position which reduces the sensitivity of the microphone "pops" when used in proximity to voice. The ATM710 is also equipped with a 10 dB switchable attenuator that reduces the sensitivity of the microphone and provides superior SPL capacity. The cardioid microphone improves isolation of the sound source and reduces pickup of sounds to the sides and rear.

  • Excels in venues with controlled stage volume or in-ear monitoring
  • Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Superior anti-shock engineering for reduced handling noise and quiet performance
  • Condenser design for studio-quality performance
  • Integral 80 Hz HPF switch and 10 dB pad switch
  • Corrosion-resistant contacts from gold-plated XLRM-type connector
  • Rugged, all-metal design and construction for years of trouble-free use
  • Quiet-Flex™ stand clamp provides silent, exible microphone positioning
  • Product guaranteed for 15 years
 

“Static for stage studio quality”

The condenser element of the ATM710 delivers on stage clarity, sharpness and remarkable precision equivalent to the performance of professional studio microphones. Moreover, its highly balanced cardioid ensures a high quality rejection.

“Robust design”

Built for the road, the ATM710 has a multilayer metal grid that provides excellent protection against plosives and sibilance without affecting treble clarity. Its superior anti-shock system significantly reduces handling noise.

“Low-cut filter and fader”

The integrated low-cut filter allows for the easy switching of flat frequency response to attenuate the bass. The 10dB attenuator reduces microphone sensitivity, whilst increasing the sound pressure level, thus increasing the versatility of the ATM710.

 

Highly versatile

The ATM710 is equipped with an 80 Hz low-cut filter and a switchable -10dB attenuator to increase the versatility of the microphone.

Multi-layer grille

The multilayer grille provides excellent protection against pops and sibilance without affecting treble clarity.

Quiet-Flex™ clamp

The AT8470 Quiet-Flex™ isolating clamp (included) protects against vibrations, offers secure retention and facilitates the positioning of the ATM710.

Protective carry case

The ATM710 comes with a soft protective pouch for easy storage and transportation.

ATM710
Element Fixed-charge back plate permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 40 - 20,000 Hz
Open Circuit Sensitivity -40 dB (10.0 mV) re 1V at 1 Pa
Impedance 200 ohms
Maximum Input Sound Level 148 dB SPL, 1 kHz at 1% T.H.D.
158 dB SPL, with 10 dB pad (nominal)
Low Frequency Roll Off 80 Hz, 12 dB/octave
Dynamic Range 127 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 73 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 3.5 mA typical
Weight 274g
Dimensions 179.0 mm (7.05") long, 50.0 mm (1.97") diameter
Output Connector Integral 3-pin XLRM-type
Accessories Included AT8470 Quiet-Flex® stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch

ATM710

Related Products

AT8114

Ball-Shaped Foam Windscreen

£13.00

AT8470

Quiet-Flex® Microphone Stand Clamp

£16.00

ATM710

Cardioid Condenser Handheld Microphone

Name Filetype Filesize
ATM710 Specification Sheet PDF 314 KB
ATM710 Polar Pattern JPG 62 KB
ATM710 Frequency Response JPG 54 KB
ATM710 Declaration of Conformity PDF 77 KB

Service & Warranty

The Audio-Technica Service Centre offer you spare parts and repairs for Microphones, Wireless Systems, Headphones and all other Audio-Technica branded products.

Contact Support

Help us to put you in touch with the right support team for your country. Select your region and country below:



Trusted by industry professionals

Trusted by industry professionals

Whether it’s on the boardroom table, the stage or in the studio, Audio-Technica products are trusted time and again by industry professionals looking for reliable, lovingly developed audio products for all budgets.

It’s Audio-Technica’s commitment to innovation, customer service and meticulous design that ensure professionals turn to us to provide solutions in conferencing, houses of worship, broadcasting, live sound, recording studios and beyond.

 

50 Years of Devotion to music

50 Years of Devotion to music

For over 50 years Audio-Technica has worked alongside leading figures in sports and music broadcast to develop and hone a range of products that deliver on the highest level.

Audio-Technica have developed and delivered products to power the Grammys, World Cup, Super Bowl, Commonwealth Games as well as every Summer and Winter Games from Atlanta 1996 to Sochi 2014.

 

A Legacy in Innovation

A Legacy in Innovation

Founded in 1962 by Hideo Matsushita, Audio-Technica positioned itself immediately as a leader in the manufacture and design of innovative audio products.

It’s expertise in innovation quickly spread to various new fields and led to the development of tone arms, microphones and headphones. Audio-Technica soon became a benchmark in those fields. Making history.

A self-made man and audiophile, Hidéo Matsushita was the former Director of the Tokyo Museum of Modern Art. It all started in his workshop, with the hand crafting of stereo cartridges. 50 years later, Audio-Technica has become a global leader in audio innovation.

 

A Passion for Listening

A Passion for Listening

Humility, passion, creativity and expertise in sound are the core values behind Audio-Technica’s legacy, greatly inspired by its founder - whose imprint on the company’s philosophy is still felt today.

Audio-Technica’s passion for listening evolved in the 70’s, when it started designing headphones, building upon a legacy in innovation, meticulous engineering and artistic design.

Today, Audio-Technica’s audio products have become globally synonymous with consistently high sonic performance paired with impeccable build construction and artistic design.

 

Lifetime Warranty

Lifetime Warranty

All Audio-Technica 40 series, 50 series, Artist and Artist Elite products come with a lifetime warranty as standard meaning you can enjoy your product safe in the knowledge that it’s guaranteed for life from the date of purchase to be free of defects in materials and workmanship. In the event of such defect, the product will be repaired or replaced without charge.*

(* Deemed by Audio-Technica to be 15 years (Serviceable lifetime), T&Cs apply)