ATM75

Cardioid Condenser Headworn Microphone

  • Professional-quality vocal pickup with hands-free operation
  • Low-visibility headband provides stable, comfortable fit
  • Pivot-mounted flexible microphone
  • Belt-mounted power module AT8531 operates on battery or phantom power
  • Cardioid polar pattern improves isolation of desired sound source
  • Also available with HRS connector (ATM75cW) for A-T UniPak wireless system

£193.00 (inc. VAT)

ATM75 ATM75 ATM75 ATM75 ATM75
ATM75

ATM75

Cardioid Condenser Headworn Microphone

The ATM75 is a headworn condenser microphone with a cardioid polar pattern. It is designed for use by performing musicians and others who require professional-quality vocal pickup with hands-free operation. . The belt-mounted power module operates on either battery or phantom power.

  • Ideal for drummers, keyboard players, guitarists or anyone requiring hands-free operation
  • Low-visibilty headband provides stable, comfortable
  • Pivot-mounted exible mic boom descends from left or right side
  • Belt-mounted power module operates on battery or phantom power
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Rugged design and construction for reliable performance
  • Switchable 80 Hz high-pass lter minimizes pickup of undesired low-frequency sounds
  • Also available in two additional versions (without power module) ATM75cW— cable terminated for A-T UniPak® wireless systems ATM75c—unterminated cable
ATM75
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 100 - 13,000 Hz
Open Circuit Sensitivity Phantom: -51 dB (2.8 mV) re 1V at 1 Pa
Battery: -53 dB (2.2 mV) re 1V at 1 Pa
Impedance Phantom: 200 ohms
Battery: 270 ohms
Maximum Input Sound Level Phantom: 132 dB SPL, 1 kHz at 1% T.H.D.
Battery: 121 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off 80 Hz, 18 dB/octave
Switches Off, on-flat, on-roll-off
Dynamic Range Phantom: 96 dB, 1 kHz at Max SPL
Battery: 85 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 58 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical
Battery Type 1.5V AA/UM3
Battery Current/Life 0.4 mA / 2000 hours typical (alkaline)
Weight Microphone: 60 g (2.1 oz)
Power module: 139 g (4.9 oz)
Dimensions Microphone: 20.4 mm (0.80") diameter
Power module: 84.0 mm (3.31") H x 63.0 mm (2.48") W x 22.0 mm (0.87") D
Headset: 120.0 mm (4.72") nominal at widest point, 80.5 mm (3.17") flexible boom
Output Connector Power module: Integral 3-pin XLRM-type
Cable 4.6' (1.4 m) long (permanently attached to microphone), 0.11" (2.8 mm) diameter, 2-conductor shielded cable with TA3F-type connector
Accessories Included AT8531 power module; AT8439 clothing clip; AT8139L large windscreen; AT8139S small windscreen; battery

ATM75

Related Products

AT8139L

Large Foam Headworn Microphone Windscreen

£10.00

AT8139S

Small Foam Headworn Microphone Windscreen

£10.00

AT8142A

Foam Temple Pads

£3.00

AT8143

Aerobics Windscreen Pack

£30.00

ATM75

Cardioid Condenser Headworn Microphone

Name Filetype Filesize
ATM75 Specification Sheet PDF 322 KB
ATM75 Polar Pattern JPG 52 KB
ATM75 Frequency Response JPG 46 KB
ATM75 Declaration of Conformity PDF 55 KB

Service & Warranty

The Audio-Technica Service Centre offer you spare parts and repairs for Microphones, Wireless Systems, Headphones and all other Audio-Technica branded products.

Contact Support

Help us to put you in touch with the right support team for your country. Select your region and country below:



Trusted by industry professionals

Trusted by industry professionals

Whether it’s on the boardroom table, the stage or in the studio, Audio-Technica products are trusted time and again by industry professionals looking for reliable, lovingly developed audio products for all budgets.

It’s Audio-Technica’s commitment to innovation, customer service and meticulous design that ensure professionals turn to us to provide solutions in conferencing, houses of worship, broadcasting, live sound, recording studios and beyond.

 

50 Years of Devotion to music

50 Years of Devotion to music

For over 50 years Audio-Technica has worked alongside leading figures in sports and music broadcast to develop and hone a range of products that deliver on the highest level.

Audio-Technica have developed and delivered products to power the Grammys, World Cup, Super Bowl, Commonwealth Games as well as every Summer and Winter Games from Atlanta 1996 to Sochi 2014.

 

A Legacy in Innovation

A Legacy in Innovation

Founded in 1962 by Hideo Matsushita, Audio-Technica positioned itself immediately as a leader in the manufacture and design of innovative audio products.

It’s expertise in innovation quickly spread to various new fields and led to the development of tone arms, microphones and headphones. Audio-Technica soon became a benchmark in those fields. Making history.

A self-made man and audiophile, Hidéo Matsushita was the former Director of the Tokyo Museum of Modern Art. It all started in his workshop, with the hand crafting of stereo cartridges. 50 years later, Audio-Technica has become a global leader in audio innovation.

 

A Passion for Listening

A Passion for Listening

Humility, passion, creativity and expertise in sound are the core values behind Audio-Technica’s legacy, greatly inspired by its founder - whose imprint on the company’s philosophy is still felt today.

Audio-Technica’s passion for listening evolved in the 70’s, when it started designing headphones, building upon a legacy in innovation, meticulous engineering and artistic design.

Today, Audio-Technica’s audio products have become globally synonymous with consistently high sonic performance paired with impeccable build construction and artistic design.

 

Two Year Limited Warranty

Two Year Limited Warranty

All Audio-Technica products come with a two year warranty as standard meaning you can enjoy your product safe in the knowledge that you’re covered.

All Audio-Technica products purchased from Audio-Technica Europe are guaranteed for two years from the date of purchase to be free of defects in materials and workmanship. In the event of such defect, the product will be repaired or replaced without charge*.

(* T&Cs apply)