ATUC-50DU

Discussion Unit

  • Discussion Unit with high-quality audio
  • Individual Automated Gain Control (AGC), Mic gain and Mic EQ
  • Compatibility with standard XLR3 pin gooseneck
  • High quality speaker for enhanced intelligibility
  • Clear LED display for volume control and channel selection
  • 5 Years Warranty

£ (Contact your local reseller for pricing)

ATUC-50DU ATUC-50DU ATUC-50DU

ATUC-50DU

discussion unit with high quality audio

Whatever your conferencing or discussion needs, the ATUC-50 is designed to offer reliable, clear and intelligible communication to significantly increase meeting efficiency and effectiveness.

Voice is the quickest and most efficient tool for exchanging ideas - whether in meeting rooms, councils, classrooms or through videoconference, speech is the most direct way of communication and understanding.

Using standard Cat 5 (and above) cabling, the ATUC-50 system connects easily through a daisy chain or ring topology.

  • Connect up to 50 discussion units to one control unit
  • Cascade up to 150 discussion units using multiple control units
  • High quality speaker for enhanced intelligibility
  • Clear LED display for volume control and channel selection
  • Individual Automated Gain Control (AGC), Mic gain and Mic EQ
  • Multicolour LED bar on the DU (rear side)
  • Multicolour LED on the Speak button
  • Compatibility with standard XLR3 pin gooseneck
  • Double gooseneck microphone
  • Paintable front plate 
  • Table top or recessed mounting
  • 5 years warranty
 
 
ATUC-50DU
Accessories Included Quick Setup Guide, Warranty Sheet
Frequency response +1.0, -2.0dB 20Hz - 20kHz, refer to +4dBu output @1kHz
Headroom 20dB
Operating Humidity 25-85%
Operating Temperature Range 0-40℃
Sampling Frequency 24bit /48kHz
Total Harmonic Distortion Less than 0.07% @1kHz unity
Phantom Power DC +24V
Dynamic Range 107dB A-Weighted
Signal-to-Noise Ratio 87dB A-Weighted
Equivalent Input Noise Less than -121dBu Rs=150ohm
Connections Inputs: Mic x 1, Outputs: Headphones x 1, CHAIN: DU / CU terminals
Power Supply DC +48V
Power Consumption 2.2W
Dimensions 135mm x 148.3mm x 84.2mm
Weight 570g

ATUC-50DU

Related Products

ATUC-M43H

3-Pin Microphone With LED Ring (430mm)

£ Contact Reseller

ATUC-M58H

3-Pin Microphone With LED Ring (580mm)

£ Contact Reseller

ATUC-HP2

Dual sided headphone for ATUC systems

£ Contact Reseller

ATUC-50IU

Integration unit for the ATUC-50 conference system

£ Contact Reseller

ATUC-50INT

Interpretation Unit

£ Contact Reseller

ATUC-50DU

Discussion Unit

Name Filetype Filesize
ATUC-50DU PDF 1.3 MB
ATUC-50 Application Brochure PDF 2.8 MB
ATUC-50 System Brochure PDF 7.8 MB
ATUC-50 Manual ENG PDF 12.58 MB
ATUC-50 Manual DEU PDF 13.66 MB
ATUC-50 Manual FRA PDF 9.24 MB
ATUC-50 Manual ITA PDF 8.58 MB
ATUC-50 Manual SPA PDF 13.44 MB
ATUC-50 Manual RUS PDF 13.55 MB
ATUC-50 Manual POR PDF 9.06 MB
ATUC-50DU Datasheet ENG PDF 1.40 MB
ATUC-50 Application Brochure Arabic PDF 696 KB
ATUC-50 System Brochure Arabic PDF 3.43 MB
Declaration of Confomity PDF 44 KB

Service & Warranty

The Audio-Technica Service Centre offer you spare parts and repairs for Microphones, Wireless Systems, Headphones and all other Audio-Technica branded products.

Contact Support

Help us to put you in touch with the right support team for your country. Select your region and country below:



Trusted by industry professionals

Trusted by industry professionals

Whether it’s on the boardroom table, the stage or in the studio, Audio-Technica products are trusted time and again by industry professionals looking for reliable, lovingly developed audio products for all budgets.

It’s Audio-Technica’s commitment to innovation, customer service and meticulous design that ensure professionals turn to us to provide solutions in conferencing, houses of worship, broadcasting, live sound, recording studios and beyond.

 

50 Years of Devotion to music

50 Years of Devotion to music

For over 50 years Audio-Technica has worked alongside leading figures in sports and music broadcast to develop and hone a range of products that deliver on the highest level.

Audio-Technica have developed and delivered products to power the Grammys, World Cup, Super Bowl, Commonwealth Games as well as every Summer and Winter Games from Atlanta 1996 to Sochi 2014.

 

A Legacy in Innovation

A Legacy in Innovation

Founded in 1962 by Hideo Matsushita, Audio-Technica positioned itself immediately as a leader in the manufacture and design of innovative audio products.

It’s expertise in innovation quickly spread to various new fields and led to the development of tone arms, microphones and headphones. Audio-Technica soon became a benchmark in those fields. Making history.

A self-made man and audiophile, Hidéo Matsushita was the former Director of the Tokyo Museum of Modern Art. It all started in his workshop, with the hand crafting of stereo cartridges. 50 years later, Audio-Technica has become a global leader in audio innovation.

 

A Passion for Listening

A Passion for Listening

Humility, passion, creativity and expertise in sound are the core values behind Audio-Technica’s legacy, greatly inspired by its founder - whose imprint on the company’s philosophy is still felt today.

Audio-Technica’s passion for listening evolved in the 70’s, when it started designing headphones, building upon a legacy in innovation, meticulous engineering and artistic design.

Today, Audio-Technica’s audio products have become globally synonymous with consistently high sonic performance paired with impeccable build construction and artistic design.

 

5 Year Warranty

5 Year Warranty

For decades the Engineered Sound range of microphones have been industry favourites in the fixed installation market. To reinforce their position as go-to microphones for your installation project Audio-Technica is delighted to offer a five year warranty on all Engineered Sound microphones as well as the full range of dante-enabled network audio microphones including the ATND971 and ATND8677*.

(* T&Cs apply)