ES947/LED

Cardioid Condenser Boundary Microphone with LED

  • Contractor-exclusive innovations for every acoustical challenge
  • Safe haven from Radio Frequency Interference (RFI)
  • Low-profile cardioid condenser boundary microphone
  • Designed for clear, highly intelligible sound reinforcement, teleconference
  • Mounts unobtrusively in table-tops, ceilings and wall panels
  • Available in black (ES947/LED) or white (ES947W/LED)

£ (Contact your local reseller for pricing)

ES947/LED ES947/LED ES947/LED ES947/LED ES947/LED

Product Features

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording and teleconferencing
  • Low-profile element provides uniform cardioid polar pattern with 120º acceptance angle
  • Mounts unobtrusively in table-tops, ceilings and wall panels
  • Self-contained power module with XLRM-type output connector
  • Rugged all-metal case with a two-layer steel mesh grille
  • Isolators provide mechanical dampening of mounting-surface vibration
  • Requires 11V to 52V DC phantom power
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)

ES947/LED

control at your fingertips

Engineered Sound have been the preferred choice of providers and other more upscale installers. This line of microphones incorporates UniGuard ™ technology that protects microphone interference related to mobile phones. Engineered Sound microphones provide the best sound quality in a discreet design. The new Engineered Sound. Contractor-exclusive innovations for every acoustical challenge. And safe haven from RFI.

This low-profile cardioid condenser boundary microphone is recommended for unobtrusive table-, ceiling-, or panel-mount applications in high-quality sound reinforcement, professional recording and teleconferencing. Designed for permanent installation, the microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone has a cardioid pattern for enhanced gain before feedback and improved signal-to-noise ratio. It is available in two colors: black (ES947/LED) and white (ES947W/LED).

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording and teleconferencing
  • Low-profile element provides uniform cardioid polar pattern with 120º acceptance angle
  • Mounts unobtrusively in table-tops, ceilings and wall panels
  • Self-contained power module with XLRM-type output connector
  • Rugged all-metal case with a two-layer steel mesh grille
  • Integral LED ring indicates mute status-green when mic is live, when muted red
  • Isolators provide mechanical dampening of mounting-surface vibration
  • Requires 11V to 52V DC phantom power
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Available in two colors: black (ES947) and white (ES947W)
 

“PURIFIED DESIGN”

With a diameter of 38mm, the ES947/LED is extremely discreet and fits perfectly into a table, ceiling or wall.

“green/red led status light”

The ES947/LED is equipped with a 360° LED light ring that visually indicates the status of the integrated microphone (on / off). It works through the microphone's phantom power, without requiring an additional external power supply.

“INDEPENDENT POWER MODULE”

The ES947/LED is equipped with an autonomous power supply module with an XLRM-type output connector, eliminating the need for an external power module.

 

led status light

The integrated circular LED light indicates the microphone's status; it stays green when the microphone is on and red when it is off.

touch switch

The touch switch located next to the capsule of the ES947/LED enables users to easily switch the microphone on or off.

Uniguard

uniguard technology

The UniGuard® shielding technology fitted to all microphones in the Engineered Sound series offers outstanding rejection of radio frequency interference (RFI).

3 colours available

The ES947/LED is available in two colors: black (ES947/LED) , white (ES947W/LED) or silver (ES947SV/LED), allowing the discreet integration of the unit into the room decor.

ES947/LED
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Half-cardioid (cardioid in hemisphere above mounting surface)
Frequency Response 40-13,000 Hz
Open Circuit Sensitivity -40 dB (10 mV) re 1V at 1 Pa
Impedance 200 ohms
Maximum Input Sound Level 142 dB SPL, 1 kHz at 1% T.H.D.
Switches Touch-sensitive control: on/mute
Dynamic Range 114 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 66 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 5.7 mA typical
Weight 66 g (2.3 oz)
Dimensions 84.8 mm (3.33") long,
38.0 mm (1.49") diameter
48.0 mm (1.89") maximum width
Output Connector Integral 3-pin XLRM-type
Accessories Included One pair isolators

ES947/LED

Cardioid Condenser Boundary Microphone with LED

Name Filetype Filesize
ES947/LED Datasheet PDF 326 KB
ES947/LED Polar Pattern JPG 84 KB
ES947/LED Frequency Response JPG 74 KB
Declaration of Conformity PDF 56 KB

Service & Warranty

The Audio-Technica Service Centre offer you spare parts and repairs for Microphones, Wireless Systems, Headphones and all other Audio-Technica branded products.

Contact Support

Help us to put you in touch with the right support team for your country. Select your region and country below:



Trusted by industry professionals

Trusted by industry professionals

Whether it’s on the boardroom table, the stage or in the studio, Audio-Technica products are trusted time and again by industry professionals looking for reliable, lovingly developed audio products for all budgets.

It’s Audio-Technica’s commitment to innovation, customer service and meticulous design that ensure professionals turn to us to provide solutions in conferencing, houses of worship, broadcasting, live sound, recording studios and beyond.

 

50 Years of Devotion to music

50 Years of Devotion to music

For over 50 years Audio-Technica has worked alongside leading figures in sports and music broadcast to develop and hone a range of products that deliver on the highest level.

Audio-Technica have developed and delivered products to power the Grammys, World Cup, Super Bowl, Commonwealth Games as well as every Summer and Winter Games from Atlanta 1996 to Sochi 2014.

 

A Legacy in Innovation

A Legacy in Innovation

Founded in 1962 by Hideo Matsushita, Audio-Technica positioned itself immediately as a leader in the manufacture and design of innovative audio products.

It’s expertise in innovation quickly spread to various new fields and led to the development of tone arms, microphones and headphones. Audio-Technica soon became a benchmark in those fields. Making history.

A self-made man and audiophile, Hidéo Matsushita was the former Director of the Tokyo Museum of Modern Art. It all started in his workshop, with the hand crafting of stereo cartridges. 50 years later, Audio-Technica has become a global leader in audio innovation.

 

A Passion for Listening

A Passion for Listening

Humility, passion, creativity and expertise in sound are the core values behind Audio-Technica’s legacy, greatly inspired by its founder - whose imprint on the company’s philosophy is still felt today.

Audio-Technica’s passion for listening evolved in the 70’s, when it started designing headphones, building upon a legacy in innovation, meticulous engineering and artistic design.

Today, Audio-Technica’s audio products have become globally synonymous with consistently high sonic performance paired with impeccable build construction and artistic design.

 

5 Year Warranty

5 Year Warranty

For decades the Engineered Sound range of microphones have been industry favourites in the fixed installation market. To reinforce their position as go-to microphones for your installation project Audio-Technica is delighted to offer a five year warranty on all Engineered Sound microphones as well as the full range of dante-enabled network audio microphones including the ATND971 and ATND8677*.

(* T&Cs apply)