Free standard delivery on all orders over £35.


Omnidirectional Condenser Boundary Microphone with LED

  • Contractor-exclusive innovations for every acoustical challenge
  • Safe haven from Radio Frequency Interference (RFI)
  • Low-profile omnidirectional condenser boundary microphone
  • Designed for clear, highly intelligible sound reinforcement, teleconference
  • Mounts unobtrusively in table-tops, ceilings and wall panels
  • Available in two colors: black (ES945/LED) and white (ES945W/LED)

£ (Contact your local reseller for pricing)



Control at your fingertips

With its low-profile design that mounts unobtrusively in tabletops for minimum visibility, the ES945/LED omnidirectional condenser boundary microphone provides clear, highly intelligible audio that is perfect for sound reinforcement, professional recording and teleconferencing, television and other demanding sound pickup applications.

Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone’s omnidirectional polar pattern affords a 360° pickup angle, while its UniGuard® RFI-shielding technology provides outstanding rejection of radio frequency interference (RFI). Users can easily toggle between mute and live audio thanks to the microphone’s capacitive-type touch-sensitive switch. An integral Red/Green LED ring indicates the mute status, staying green when the microphone is live and turning red when it is muted.

Additionally, the ES945/LED is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module.

  • Mounts unobtrusively in tabletops, ceilings or walls
  • Low-profile element Provides uniform omnidirectional polar pattern with 360° acceptance angle
  • RFI-shielding technology UniGuard® offers outstanding rejection of radio frequency interference (RFI)
  • Self-contained electronics with XLRM termination eliminate the need for external power module
  • Requires phantom power supply of 11V to 52V
  • Rugged all-metal case with a two-layer steel mesh grille
  • Capacitive touch-sensitive deviation allows users to switch easily mute / un-mute the microphone
  • Integral LED ring indicates mute status-green when mic is live, when muted red
  • A pair of isolators provide mechanical dampening of surface-mounting vibration
  • Available in two colors: black (ES945/LED) and white (ES945W/LED)


With a diameter of 38mm, the ES945/LED is extremely discreet and fits perfectly into a table, ceiling or wall.

“GREEN/RED LED status light”

The ES945/LED is equipped with a 360° LED light ring that visually indicatess the status of the integrated microphone (on / off). It works through the microphone's phantom power, without requiring an additional external power supply.


The ES945/LED is equipped with an autonomous power supply module with an XLRM-type output connector, eliminating the need for an external power module.



The integrated circular LED light indicates the microphone's status; it stays green when the microphone is on and red when it is off.


The touch switch located next to the capsule of the ES945/LED enables users to easily switch the microphone on or off.


uniguard technology

The UniGuard® shielding technology fitted to all microphones in the Engineered Sound series offers outstanding rejection of radio frequency interference (RFI).


The ES945/LED is available in two colors: black (ES945/LED) or white (ES945W/LED), allowing the discreet integration of the unit into the room decor.

Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Omnidirectional
Frequency Response 40-19,000 Hz
Open Circuit Sensitivity -40 dB (10 mV) re 1V at 1 Pa
Impedance 200 ohms
Maximum Input Sound Level 142 dB SPL, 1 kHz at 1% T.H.D.
Switches Touch-sensitive control: on/mute
Dynamic Range 113 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 5.7 mA typical
Weight 65 g (2.3 oz)
Dimensions 84.8 mm (3.33") long,
38.0 mm (1.49") diameter
48.0 mm (1.89") maximum width
Output Connector Integral 3-pin XLRM-type
Accessories Included One pair isolators


Omnidirectional Condenser Boundary Microphone with LED

Name Filetype Filesize
ES945/LED Datasheet PDF 194 KB
ES945/LED Polar Pattern JPG 83 KB
ES945/LED Frequency Response JPG 72 KB
Declaration of Conformity PDF 56 KB

Service & Warranty

The Audio-Technica Service Centre offer you spare parts and repairs for Microphones, Wireless Systems, Headphones and all other Audio-Technica branded products.

Contact Support

Help us to put you in touch with the right support team for your country. Select your region and country below:

Trusted by industry professionals

Trusted by industry professionals

Whether it’s on the boardroom table, the stage or in the studio, Audio-Technica products are trusted time and again by industry professionals looking for reliable, lovingly developed audio products for all budgets.

It’s Audio-Technica’s commitment to innovation, customer service and meticulous design that ensure professionals turn to us to provide solutions in conferencing, houses of worship, broadcasting, live sound, recording studios and beyond.


50 Years of Devotion to music

50 Years of Devotion to music

For over 50 years Audio-Technica has worked alongside leading figures in sports and music broadcast to develop and hone a range of products that deliver on the highest level.

Audio-Technica have developed and delivered products to power the Grammys, World Cup, Super Bowl, Commonwealth Games as well as every Summer and Winter Games from Atlanta 1996 to Sochi 2014.


A Legacy in Innovation

A Legacy in Innovation

Founded in 1962 by Hideo Matsushita, Audio-Technica positioned itself immediately as a leader in the manufacture and design of innovative audio products.

Its expertise in innovation quickly spread to various new fields and led to the development of tone arms, microphones and headphones. Audio-Technica soon became a benchmark in those fields. Making history.

A self-made man and audiophile, Hidéo Matsushita was the former Director of the Tokyo Museum of Modern Art. It all started in his workshop, with the hand crafting of stereo cartridges. 50 years later, Audio-Technica has become a global leader in audio innovation.


A Passion for Listening

A Passion for Listening

Humility, passion, creativity and expertise in sound are the core values behind Audio-Technica’s legacy, greatly inspired by its founder - whose imprint on the company’s philosophy is still felt today.

Audio-Technica’s passion for listening evolved in the 70’s, when it started designing headphones, building upon a legacy in innovation, meticulous engineering and artistic design.

Today, Audio-Technica’s audio products have become globally synonymous with consistently high sonic performance paired with impeccable build construction and artistic design.


5 Year Warranty

5 Year Warranty

For decades the Engineered Sound range of microphones have been industry favourites in the fixed installation market. To reinforce their position as go-to microphones for your installation project Audio-Technica is delighted to offer a five year warranty on all Engineered Sound microphones as well as the full range of dante-enabled network audio microphones including the ATND971 and ATND8677*.

(* T&Cs apply)