£479.00 (inc. VAT)
The AT-OC9/III features a special line contact stylus embedded into a low profile solid boron cantilever, ensuring the music signals read by the tip of the stylus are transmitted reliably to the coils.
The OC9's "VC mould" design ensures stability and rigidity whilst the dual moving coil offers excellent stereo separation and improved frequency response for long lasting performance.
The use of PCOCC wire (Pure Copper by Ohno Continuous Casting), a special copper with virtually no transverse crystal barriers to impede signal transmission, perfects the performance of the advanced dual coil design
Special line contact stylus and solid boron cantilever with a 0.26 mm diameter
The cartridge features a special line contact stylus with a 40μm x 7μm curvature radius at the stylus tip. This not only ensures that the music signals engraved in the analogue records will be read out completely but also it gives expression to the highest dynamic compliance of the series. By firmly embedding this line contact stylus in a solid boron cantilever with its 0.26 mm diameter and by bonding it in place, the music signals read by the tip of the stylus are transmitted reliably to the power-generating coils.
Neodymium magnet and permendur yoke have drastically increased the magnetic energy
The magnet is a neodymium magnet with a maximum energy product BHmax of 50[kJ/m3] while a permendur yoke is used with a high saturation flux density and excellent magnetic materials.
Together, they further boost the magnetic field concentrated in the coil gap area.
PCOCC used for coils and terminal pins
PCOCC does not give rise to crystalline interfacing in the transmission direction so audiophiles can enjoy pure transmissions.
Dual moving coil with high separation and wide response
Our unique moving coil type cartridge has a basic structure where one cylindrical coil is used for the left channel and another is used for the right channel. This structure by which power is generated independently for the left and right channels physically provides outstanding separation characteristics. The AT-OC9/III adopts a reverse V-shaped formation for the two left and right coils to reduce the vibration mass as seen from the stylus tip and minimize the unnecessary movement of the coils to further diminish the distortion.
Dual moving coil with high separation and wide response
Our unique moving coil type cartridge has a basic structure where one cylindrical coil is used for the left channel and another is used for the right channel. This structure by which power is generated independently for the left and right channels physically provides outstanding separation characteristics. The leakage of signals from one channel into the other exerts a decisive influence on the stereo expanse as well as on the sound quality. This is because this leakage is tantamount to creating irregular cross modulation. The reason why the dual moving coil system delivers such a clear and finely delineated sound quality is no doubt due to the system’s naturally excellent separation. The AT-F7 features a reverse V-shaped formation for the two left and right coils to reduce the vibration mass as seen from the stylus tip.
VC mould for minimising unnecessary vibration
The VC mould that holds the coils in place is made of a hard synthetic resin which is combined with potassium titanate for increased strength and rigidity.
Rugged body dedicated to achieving a design with increased rigidity
Using a precision-crafted sturdy aluminium alloy as the base, the body’s structure is made of hard resin keep parasitic resonance down to a minimum. This minimizes undesirable vibration while the bottom of the body is plated to achieve greater rigidity and an improved signal-to-noise ratio.
Neodymium magnet with dramatically enhanced magnetic energy and permendur yoke with high saturation flux density and outstanding magnetic properties.
The VC mould that affixes the coil is made with hard synthetic resin containing potassium titanate for increased strength and rigidity whilst minimising unnecessary vibration.
|Type||Dual Moving Coil|
|Frequency Response||15 - 50,000Hz|
|Channel Separation||30dB (1kHz)|
|Output Channel Balance||0.5dB (1kHz)|
|Output Voltage||0.4mV (1kHz and 5cm/sec.)|
|Vertical Tracking Angle||23°|
|Vertical Tracking Force Range||1.8 - 2.2g (2.0g standard)|
|Stylus Shape||Special Line contact stylus (curvature radius: )|
|Stylus Curvature Radius||40 x 7µm|
|Stylus Construction||Nude Square Shank|
|Cantilever||0.26 mm diameter solid boron|
|Coil Impedance||12Ω (1kHz)|
|Coil Inductance||25 µm (1kHz)|
|Dynamic Compliance||18×10-6cm/dyne (100Hz)|
|Recommended Load Impedance||Min 100Ω|
|Dimensions||17.3 (H) x 16.8 (W) x 25.7 (L) mm|
|Accessories Included||One non-magnetic screwdriver; one brush; two washers; two 12mm mounting screws; two nuts; two 18mm mounting screws; one plastic protector; one set of PCOCC Lead Wires (AT6101)|
The Audio-Technica Service Centre offer you spare parts and repairs for Microphones, Wireless Systems, Headphones and all other Audio-Technica branded products.
Help us to put you in touch with the right support team for your country. Select your region and country below:
Whether it’s on the boardroom table, the stage or in the studio, Audio-Technica products are trusted time and again by industry professionals looking for reliable, lovingly developed audio products for all budgets.
It’s Audio-Technica’s commitment to innovation, customer service and meticulous design that ensure professionals turn to us to provide solutions in conferencing, houses of worship, broadcasting, live sound, recording studios and beyond.
For over 50 years Audio-Technica has worked alongside leading figures in sports and music broadcast to develop and hone a range of products that deliver on the highest level.
Audio-Technica have developed and delivered products to power the Grammys, World Cup, Super Bowl, Commonwealth Games as well as every Summer and Winter Games from Atlanta 1996 to Sochi 2014.
Founded in 1962 by Hideo Matsushita, Audio-Technica positioned itself immediately as a leader in the manufacture and design of innovative audio products.
Its expertise in innovation quickly spread to various new fields and led to the development of tone arms, microphones and headphones. Audio-Technica soon became a benchmark in those fields. Making history.
A self-made man and audiophile, Hidéo Matsushita was the former Director of the Tokyo Museum of Modern Art. It all started in his workshop, with the hand crafting of stereo cartridges. 50 years later, Audio-Technica has become a global leader in audio innovation.
Humility, passion, creativity and expertise in sound are the core values behind Audio-Technica’s legacy, greatly inspired by its founder - whose imprint on the company’s philosophy is still felt today.
Audio-Technica’s passion for listening evolved in the 70’s, when it started designing headphones, building upon a legacy in innovation, meticulous engineering and artistic design.
Today, Audio-Technica’s audio products have become globally synonymous with consistently high sonic performance paired with impeccable build construction and artistic design.
All Audio-Technica products come with a two year warranty as standard meaning you can enjoy your product safe in the knowledge that you’re covered.
All Audio-Technica products purchased from Audio-Technica Europe are guaranteed for two years from the date of purchase to be free of defects in materials and workmanship. In the event of such defect, the product will be repaired or replaced without charge*.
(* T&Cs apply)