Important Information: Coronavirus (COVID-19)
Free standard delivery on all orders over £35.


Interpretation Unit

  • Interpretation unit for up to three language interpretation
  • Alphanumeric LED display with 4 buttons
  • Choice of floor or relayed language as incoming language
  • Interlock, no-interlock and combine mode of the interpretation units
  • Up to two interpretation units per language
  • 3 pin XLR connector

£359.00 (inc. VAT)


The ATUC-50INT interpretation unit enhances the ATUC-50 conferencing system with up to three (3) language interpretation. The alphanumeric LED display has 4 buttons where the left-most button selects the choice of the incoming language and the right-most button selects the choice of outgoing language. The middle two (2) buttons toggle between language select or headphone volume select and control. There can be up to two (2) ATUC-50INT assigned per language, which enables a total maximum of six (6) ATUC-50INT interpretation units per system. The ATUC-50INT can be placed anywhere in the chain/ring and does not require a proprietary cable run. The ATUC-50INT features relayed interpretation. This enables the interpreter to choose between listening to the floor (spoken) language or to another interpreted language (Language 1).

  • Interpretation unit for up to three language interpretation
  • Alphanumeric LED display with 4 buttons for choosing the incoming and outgoing languages, and adjustment of the headphone output level
  • Choice of floor or relayed language as incoming language
  • Interlock, no-interlock and combine mode of the interpretation units
  • Up to two interpretation units per language
  • 3 pin XLR connector for the ATUC-M43H or ATUC-M58H gooseneck microphones or any 24V phantom powered condenser microphones
Accessories Included Quick setup guide, warranty sheet
Frequency response + 1.0, – 2.0dB, 20Hz~20kHz, refer to +4dBu output @ 1kHz
Headroom 20 dB
Operating Humidity 25-85%
Operating Temperature Range 0-40° C
Sampling Frequency 24 bit /48 kHz
Total Harmonic Distortion Less than 0.07% @1kHz unity
Phantom Power DC +24V
Dynamic Range 107 dB A-weighted
Signal-to-Noise Ratio 87 dB, A-weighted
Equivalent Input Noise Less than –121dBu, Rs =150 ohm
Connections Inputs: MIC (Neutrik XLR-F)
Outputs: Headphones x 1
LINK /CHAIN : DU RJ45 A /B terminals
Power Supply DC +48V
Power Consumption 2.2 W
Dimensions 135mm x 148.3mm x 84.2mm
Weight 570g


Related Products


Control Unit



Discussion Unit

£ Contact Reseller


3-Pin Microphone With LED Ring (430mm)



3-Pin Microphone with LED Ring (580mm)



Dual sided headphone for ATUC systems



Integration unit for the ATUC-50 conference system



Weight Plate for ATUC-50DU



Interpretation Unit

Name Filetype Filesize
ATUC-50INT Datasheet PDF 1319 KB
ATUC-50 Application Brochure ENG PDF 2.8 MB
ATUC-50 System Brochure SPA PDF 2.2 MB
ATUC-50 System Brochure ENG PDF 7.8 MB
ATUC-50 Manual ENG PDF 12.58 MB
ATUC-50 Manual DEU PDF 13.66 MB
ATUC-50 Manual FRA PDF 9.24 MB
ATUC-50 Manual ITA PDF 8.58 MB
ATUC-50 Manual SPA PDF 13.44 MB
ATUC-50 Manual RUS PDF 13.55 MB
ATUC-50 Manual POR PDF 9.06 MB
ATUC-50 Application Brochure Arabic PDF 3.43 MB
ATUC-50 System Brochure Arabic PDF 44 KB
ATUC-50INT Firmware ZIP 545 KB
Locate Software ZIP 4.83 MB

Service & Warranty

The Audio-Technica Service Centre offer you spare parts and repairs for Microphones, Wireless Systems, Headphones and all other Audio-Technica branded products.

Contact Support

Help us to put you in touch with the right support team for your country. Select your region and country below:

Trusted by industry professionals

Trusted by industry professionals

Whether it’s on the boardroom table, the stage or in the studio, Audio-Technica products are trusted time and again by industry professionals looking for reliable, lovingly developed audio products for all budgets.

It’s Audio-Technica’s commitment to innovation, customer service and meticulous design that ensure professionals turn to us to provide solutions in conferencing, houses of worship, broadcasting, live sound, recording studios and beyond.


50 Years of Devotion to music

50 Years of Devotion to music

For over 50 years Audio-Technica has worked alongside leading figures in sports and music broadcast to develop and hone a range of products that deliver on the highest level.

Audio-Technica have developed and delivered products to power the Grammys, World Cup, Super Bowl, Commonwealth Games as well as every Summer and Winter Games from Atlanta 1996 to Sochi 2014.


A Legacy in Innovation

A Legacy in Innovation

Founded in 1962 by Hideo Matsushita, Audio-Technica positioned itself immediately as a leader in the manufacture and design of innovative audio products.

Its expertise in innovation quickly spread to various new fields and led to the development of tone arms, microphones and headphones. Audio-Technica soon became a benchmark in those fields. Making history.

A self-made man and audiophile, Hidéo Matsushita was the former Director of the Tokyo Museum of Modern Art. It all started in his workshop, with the hand crafting of stereo cartridges. 50 years later, Audio-Technica has become a global leader in audio innovation.


A Passion for Listening

A Passion for Listening

Humility, passion, creativity and expertise in sound are the core values behind Audio-Technica’s legacy, greatly inspired by its founder - whose imprint on the company’s philosophy is still felt today.

Audio-Technica’s passion for listening evolved in the 70’s, when it started designing headphones, building upon a legacy in innovation, meticulous engineering and artistic design.

Today, Audio-Technica’s audio products have become globally synonymous with consistently high sonic performance paired with impeccable build construction and artistic design.


Two Year Limited Warranty

Two Year Limited Warranty

All Audio-Technica products come with a two year warranty as standard meaning you can enjoy your product safe in the knowledge that you’re covered.

All Audio-Technica products purchased from Audio-Technica Europe are guaranteed for two years from the date of purchase to be free of defects in materials and workmanship. In the event of such defect, the product will be repaired or replaced without charge*.

(* T&Cs apply)