ATM35 - Discontinued
- Clips to brass, reeds, piano, acoustic bass, snare and toms
- Crisp, clear, well-balanced response, even at high SPLs
- Interchangeable elements available for hypercardioid and subcardioid polar patterns
- UniMount® clip permits accurate positioning while protecting element
- Operates on battery or phantom power
- Also available as: ATM35cW -- less power module; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak™ wireless systems
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 30-20,000 Hz
- Low Frequency Roll Off: 150 Hz, 12 dB/octave
- Open Circuit Sensitivity: -45 dB (5.6 mV) re 1V at 1 Pa
- Impedance: 200 ohms
- Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: 118 dB, 1 kHz at Max SPL
- Signal to Noise Ratio: 67 dB, 1 kHz at 1 Pa
- Phantom Power Requiremens: 11-52V DC, 2 mA typical
- Battery Type: 9V
- Battery Current Life: 1 mA / 1000 hours typical
- Switch: On-flat, on-roll-off (phantom) Off, on-flat, on-roll-off (battery)
- Cable: 25' (7.6 m) long (permanently attached to microphone), with TA3F output connector that mates with TB3M jack on power module
- Accessories: AT8418 UniMount® instrument mount; AT8532 power module; soft protective pouch
| Description | File Type |
|---|---|
| ATM35 Polar Pattern |  51 KB |
| ATM35 Frequency Response | 47 KB |
Add to My Audio-Technica